M/s Metchem Surface Technologies

Metochem PS-2 is a solvent type, non-flammable, non-corrosive paint stripper designed to remove lacquers, varnishes, enamels, primers, and various other organic coatings from metallic and non-metallic surfaces. Removal of paints by METOCHEM PS-2is much more economical and simple than sand-blasting.

Metochem PS-2 contains an excellent combination of penetrants and emulsifiers which accelerate the paint stripping action. It effectively removes multiple coats of paints from metallic substrates without adversely affecting the base metals. It is viscous in nature and hence can be easily applied by brush to vertical and horizontal surfaces with minimum loss.

Uses:

• For removing stoved enamel coatings from ferrous and non-ferrous metals
• For removing primer cum paints from motor vehicles.
• For  removal  of  multiple  coats  of  paint  from  Rail  Coaches,  Bus  Bodies,  Truck  Bodies,  Ships, hulls, etc.
• For  removal  of  enamels,  lacquers,  and  certain  polyurethane  paints  safely  and  economically  from metal surfaces of piston and jet aircrafts.
• For removing powder coatings.
• For  removal  of  various  organic  paints  from  storage  tanks,  pipe-lines, reaction  vessels,  large structures like offshore platforms and various other machineries and equipments.
• For removing paints from wood, glass, concrete, ceramic surfaces.
• For  removal  of  coatings  by  brush  application,  where  dipping  application  is  not  feasible  or economical

Pack Size also available in 6kg.

 Metochem PS-1 is effective in removing varnishes, insulations and enamels from copper wires. It is also widely used for quick removal of powder coatings and other organic coatings from ferrous and non-ferrous metals without attacking the base surface. METOCHEM PS-1may also be used for removal of various coatings from non-metals such as Wood, Glass and Ceramics.

Pack Size also available in 6kg.

METOCHEM PS-1-B

 (Non-flammable, Solvent based Enamel & Coating Remover)

 

METOCHEM PS-1 is effective in removing varnishes, insulations and enamels from copper wires.  It is also widely used for quick removal of powder coatings and other organic coatings from ferrous and non-ferrous metals without attacking the base surface.  METOCHEM PS-1 may also be used for removal of various coatings from non-metals such as Wood, Glass and Ceramics.   

 

APPLICATIONS:                                                                                                             

 

1.      For removal of Enamel and  Insulations from  Copper Wire :

 

Keep the bunch of Copper wires continuously immersed in METOCHEM PS-1 for 1 – 5 minutes and the enamel will be loosened completely, then simply wipe it off with dry cloth.  Dip only the portion from which enamel has to be removed (METOCHEM PS -1 may not be effective on certain insulations).

 

2.      For removal of Powder Coatings & other Organic Coatings :

 

Simply dip the articles or parts directly in METOCHEM PS-1 solution without mixing or dilution at room temperature for 2 to 10 minutes or more.  The coating will start to blister slowly.  Once the coating has sufficiently loosened take the parts out of the bath and remove coating with the help of water jet or manually and then wipe off with dry cloth.  If parts are kept in METOCHEM PS-1 for a longer duration, then coating will get removed inside the solution, which may then weaken the strength of solution. 

Additional Information:

• Item Code: metochem-ps-1-b
• Production Capacity: 30 tonnes/month
• Delivery Time: 3 days